NewMar King Aire Diesel Pusher 2013, Руководство пользователя, Страница: 129 / 137

2013 King Aire Diesel Pusher
by Newmar
128
Drying your RV
Drying your RV is just as important as washing it. Today’s tap-water and well-water
contain many chemicals that could water stain your RV’
s finish.
After washing, dry your
RV with the
EZE Squeegee (# 018462
) or a clean 100% leather chamois. You can also use fresh
Microfiber towels for drying. Please use caution as these towels are made partially with polyester
(
which is plastic
) which can break down over time from extended use and washing, eventually
causing damage to the clear coat finish.
IMPORTANT
Never use a strong solvent, such as lacquer thinner or harsh abrasives, on any of the exterior
painted surfaces.
Waxing
The exterior finish will require a routine waxing. When water will not bead and roll off a freshly
washed vehicle, a new coat of wax is needed. Wax not only improves the appearance of the
vehicle, but it also protects the finish against oxidation and corrosive materials. The
recommended type of wax is one that is compatible with painted or gel-coated fiberglass finishes,
and contains a UV (ultra-violet) inhibitor. Buffing with a polishing compound
will improve a dull or discolored finish. Review the BASF information provided with your unit
for detailed paint care instructions.
IMPORTANT
When using a polishing compound that does not contain a wax preservative, reapplying a coat of
hard wax after polishing is recommended.
Seals
The seals around doors, windows, vents, slide out trim and external seams should be checked at
least twice a year. In addition, the roof seams should be inspected twice a year for cracking or
peeling. If deterioration is noted during a routine maintenance inspection, reseal the seams or
seals with an approved sealant to prevent leaks. It is recommended that a Newmar Authorized
Service Center perform these inspections, and reseal when necessary.