NewMar King Aire 2015, Руководство пользователя

Страница: 22 / 238

Dash Instrumentation and Controls
The dash in your new King Aire is designed to be ergonomically efficient as well as aesthetically
pleasing. It features instrumentation that allows you to monitor the engine, chassis, and power train as you
drive.
Warning and status lights alert you to conditions that require your attention, and switches, buttons, and
accessories are positioned at your fingertips. All dash gauges are “back-lit” for enhanced visibility during
night driving. The gauges are arranged as follows:
Left Cluster
Voltage : Displays DC voltage at the chassis battery terminals. Note that some variation in the readings on
this gauge is normal. With the ignition key in the “run” position, but the engine shut off, it will read
chassis battery voltage. If the engine is running, the voltage displayed reflects the DC voltage being
supplied by the engine alternator as measured at the chassis batteries.
Fuel: Displays the approximate level of fuel left as a fraction of a tank (“Full”, “3/4”, “1/2”, “1/4”, and
“Empty”). Note that accuracy of this gauge is greatly influenced by motion of the unit, or sloped terrain.
The readings are an approximation of the remaining fuel in the tank.
Front Air Tank: Displays the air pressure in the front air tank. The normal operating range for this air
system is 90 – 125 PSI. Air from the engine mounted compressor fills the tank when the engine is
running. The air is used to inflate air suspension bags, and to operate the air brakes on your King Aire, as
well as any other air powered accessories.
Rear Air Tank: Displays the air pressure in the rear air tank. The normal operating range for this air
system is 90 – 125 PSI. Air from the engine mounted compressor fills the tank when the engine is
running. The air is used to inflate air suspension bags, and to operate the air brakes on your King Aire, as
well as any other air powered accessories.
Center Cluster
Speedometer : Reads vehicle speed in miles per hour / kilometers per hour.
Odometer : Cumulative miles on your King Aire are displayed on the screen located at the bottom of the
speedometer. This electronic digital display allows for easy reading. The odometer also incorporates two
separate “trip” odometers, which can be reset to “0” using the button at the bottom of the display. This
feature is useful for reference mileages when measuring fuel economy or trip distances.
Right Cluster
Tachometer : Displays engine RPM’s (Revolutions per Minute) when running.
Oil Pressure : Displays engine oil pressure in PSI (Pounds per Square Inch). Oil pressure will vary widely
with engine temperature and engine operating RPM’s.
Temperature: Displays engine operating temperature. Normal operating temperatures are 180 – 220
degrees, depending on how the coach is being used. Towing heavy loads, or operating in the mountains
will cause the engine temperature to run higher.
2015 Newmar King Aire Diesel Bus 20