Newland NLS-BS30, Руководство пользователя

Страница: 34 / 247

Enter Setup
** Exit Setup
20
Good Read Delay
Good Read Delay sets the minimum amount of time before the scanner can read another barcode. This parameter is programmable in
1ms increments from 1ms to 3,600,000ms. The default setting is 500ms. Scan the appropriate barcode below to enable or disable the
delay.
Enable Good Read Delay
** Disable Good Read Delay
To set the good read delay, scan the barcode below, then set the delay (from 1 to 3,600,000ms) by scanning the digit barcode(s) then
scanning the
Save barcode from the Appendix.
Good Read Delay
Set the good read delay to 1,000ms:
1. Scan the Good Read Delay barcode.
2.
Scan the numeric barcodes “1”, “0”, “0” and “0” from the “Digit Barcodes” section in Appendix.
3. Scan the Save
barcode from the “Save/Cancel Barcodes” section in Appendix.