15
Barcode
1. In the system Menu, enter “Systemset” – “Barcode” and set the parameter per your needs.
2. Enter the “BarcodeSet” to turn on /off the decoding barcode.
3. Enter “Type Check” to check the current reading module type.
4.
Enter the “Recovery” to restore the factory default configuration.
U Disk
1. In the system Menu, enter “Systemset” – “Udisk” and set the parameter per your needs.
2. Enter “Udisk Chk” to scan and fix the USB flash disk. Enter “Format UDisk” to format all data on the flash disk.
3. Press the
“OK” key to confirm and exit after all operate successfully.
