Newisys NA-1400, Руководство пользователя

Страница: 31 / 64

Managing Settings
NA-1400 31
As explained in “Installation and Setup,” you also can use the Power switch on the front of the NA-1400 to
power down the server.
To use the power switch to power down the NA-1400:
• Normal power-down: Quickly press then release the Power button. The NA-1400 begins to power
down. When the power light is off, you can disconnect the power cord from the NA-1400.
• Hard power-down: If the NA-1400 does not respond, you can press and hold the power switch for a
few seconds. This results in an attempted proper shutdown followed by a hard power-down in about 20
seconds.
Caution: Use hard power-down as little as possible. This method can result in data
loss.
Figure 8: Shutdown Window