INSTALLATION- LED BULLET FLOOD
General Safety Information
•
To reduce the risk of death, personal injury or property damage from fire, electric shock,
falling parts, cuts/abrasions, and other hazards read all warnings and instructions included
with and on the fixture box and all fixture labels.
•
Before installing, servicing, or performing routine maintenance upon this equipment, follow
these general precautions.
•
Commercial installation, service and maintenance of luminaires should be performed by a
qualified licensed electrician.
•
For Residential installation: If you are unsure about the installation or maintenance of the
luminaires, consult a qualified licensed electrician and check your local electrical code.
•
DO NOT INSTALL DAMAGED PRODUCT!
•
This fixture is intended to be connected to a properly installed and grounded UL listed
junction box.
WARNING:
RISK OF ELECTRICALSHOCK
•
Turn off the power when you perform any maintenance.
•
Verify that supply voltage is correct by comparing it with the luminaire label information.
•
Make all electrical and grounded connections in accordance with the National Electrical
Code and any applicable local code requirements.
•
All wiring connections should be capped with UL approved wire connectors.
CAUTION:
RISK OF INJURY
•
Wear gloves and safety glasses at all times when removing luminaire from carton, installing, servicing or performing
maintenance.
•
Avoid direct eye exposure to the light source while it is on.
•
Account for small parts and destroy packing material, as these may be hazardous to children.
CAUTION:
RISK OF FIRE
•
Keep combustible and other materials that can burn away from luminaire and lamp/lens.
• MIN 90°C SUPPLY CONDUCTORS.
Illustrations on the manual are for installation purposes only. It may not be identical to the fixture purchased.
Models BLF12BRZ and BLF30BRZ
