Newgy Industries Robo-Pong 1055 Скачать руководство пользователя страница 46

LIMITED 1 YEAR WARRANTY*

Manufacturer warrants to the original retail purchaser this product to be free from defects in material and workmanship 
for a period of 1 year from date of purchase.

Should  this  product  become  defective  due  to  material  or  workmanship  during  the  warranty  period,  contact  our 
Customer Service Department describing the defect. Always provide your serial number. We will provide you with return 
authorization and shipping instructions. If you are asked to return the product, pack it securely and ship it PREPAID.

If defective as provided by the terms of this warranty, we will, at our option, repair or replace the product and return it 
prepaid to a continental U.S. address (other areas carry a shipping charge).

This  warranty  is  not  transferable  and  does  not  cover  normal  wear  and  tear,  or  damage  caused  by improper handling, 

installation, or use. This warranty is void if the product is in any way abused, damaged, or modified from its original state.

This warranty gives you specific legal rights, and you may have other rights that may vary from state to state. 

*

Warranty and service valid only in territory of original sale.

Thank  you  for  purchasing  a  Newgy  Robo-Pong  robot.  We  inspect  our  products  to  be  sure  they  are  of  high 

quality and free of defects. However, if you need service or advice on your robot, please contact our Customer 
Service Department. The information below is applicable only to Newgy customers in North and South America. 
If you are in another area of the world, please contact the distributor for your area for service policies that apply 

to your country. A list of distributors can be found at Newgy.com.

Please  call  us  for  return  authorization  before  you  send  in  your  robot  for  repair.  Often,  repairs  can  easily  be 
handled on the phone. Have you tried to troubleshoot the problem by trying the tips on page 39 or performing 
a Factory Default Restoration (pg. 14) You may also want to visit our website to see if any information has been 
updated. When you do call, please have your serial number and this manual handy. (The serial number is located 

on  the  Support  Flange—see  Fig.  14,  pg.  19.)  If,  after  talking  with  our  Service  Department,  you  need  to  send  in 
your  robot,  include  a  brief  note  describing  the  problem  and  listing  your  daytime  phone  number  and  shipping 
address.

If you know which part you want to order, you may order it by phone if you have a credit card (Visa, MasterCard, 

American Express, or Discover). Parts are not available via our website.

OUT  OF  WARRANTY  SERVICE  POLICY:  When  your  1  Year  Limited  Warranty  expires,  Newgy  will  repair  any 

normal wear and tear to the robot for our current hourly service charge, plus the cost of parts and shipping and 
handling (for Contiguous U.S., other areas carry additional fees) for a period of 5 years from date of purchase. 

This policy does not cover damage due to abuse, misuse, or improper handling and applies only to the original 

retail purchaser of Newgy robots bought from the USA.

Your  Warranty  Card  should  be  registered  on  line  within  15  days  of  purchase.  Go  to  www.newgy.com/support-

warranty-form.aspx to register. A place to copy the warranty information is given below. Be sure to keep your 
purchase receipt. We suggest you keep your receipt with this manual and record the following information:

Date Purchased  ______________________  Serial #  ______________________

Store Name 

 _______________________  City, State ____________________

Extended warranties are available at www.newgy.com.

CONTACT US

Newgy Industries, Inc.

Tennessee, USA

800-556-3949

615-452-6470

[email protected]

www.newgy.com

Manufactured  under  the  following  U.S.  patents: 
8758174,  D663757,  5485995  &  4844458.  Additional 
U.S.  and  foreign  patents  pending.  Robo-Pong,  Pong-
Master, Robo-Balls, Pong-Pal, Newgy, and The Quicker 
Ball Picker Upper are trademarks owned or exclusively 
licensed to Newgy Industries, Inc., Tennessee, USA.

© 

Newgy Industries, Inc., 2017 All rights reserved.

v6.11.18

Содержание Robo-Pong 1055















































Отзывы: