32
#1 – The RED area is a standard drop down area with three
items;
•
File - Export / Import / Exit
•
Device – Auto Connect/ Disconnect
•
About – Copyright 2017 Newgy Industries Inc.
Version R3.01
#2 – The BLUE area is where the ability to select, open/
read or write/save a drill. All new drills once saved, will
show the number of the new drill in this area.
#3 – The GREEN area shows all the values of a ball in a
Drill or when you are creating new drills, this is where you
decide locations, speed and wait times between the balls.
The Ball Actions area will display all the balls in the select-
ed drill from area #1 and will fill as you add new balls to a
drill.
MAIN INTERFACE
#4 – The DARK RED area are the RUN CONTROLS for
operating a drill selected in area #1 (DRILL ON
CONTROLLER) or allows controls for area #5 (NORMAL/
TEST) of Run and Stop while using RP.2.PC. Once RUN is
pressed, it will be locked until STOP is selected. DRILL or
NORMAL mode must be selected prior to using that fea-
ture.
#5 – The ORANGE area is the Controllers for Ball Speed,
Oscillation and turning the Random on or off when using
the Normal/Test mode while in RP.2.PC.
1
2
5
3
4
