Newer Technology miniStack Classic, Инструкция пользователя и руководство по сборке

Страница: 8 / 24

➅
➄
Place your drive into the chassis of the miniStack Classic. There are 2
mounting tabs with screwholes on the side furthest away from you in this
photograph, and one screw post on the side closest to you.
Slide your drive into the SATA socket on the green circuit board.
➙
Insert the 3 large Phillips screws from the plastic bag into the drive
enclosure securing the hard drive through the screwholes.
Place the top cover back onto the miniStack Classic, being sure to secure
the plastic retaining clips without breaking them.
Remove the screws from the
plastic bag. For the next step,
you will want the 3 larger
screws.