Newer Technology miniStack Classic, Инструкция пользователя и руководство по сборке

Страница: 20 / 24

Newer Technology miniStack Classic Chapter 4 -Troubleshooting & Tips
4 TROUBLESHOOTING & TIPS
4.1 Troubleshooting
Some of the most simple problems can be traced to power or connectiv-
ity issues. Verify that your cables (both ends!) are properly plugged into
the computer and storage solution. If they are, and the storage solution is
still not working properly, try connecting to another interface to see if the
device works properly. If these suggestions do not work, try connecting the
NewerTech miniStack Classic to a different computer, if available to you.
If the power light is on the front of the Newer Technology miniStack Classic
is not turning on, try a different interface.
4.2 Tips
To properly unmount any connected hard drives from your computer, you
need to follow a few simple steps.
• For Macintosh systems:
There are a few methods to umount disks with Macintosh systems. Either
drag the icon for the hard disk you wish to unmount to the trash can, or
click the eject icon next to the hard disk name under the “DEVICES” tab in
the sidebar in any finder window, or right click and choose eject from the
popup menu that will appear.
• For Windows systems:
1. Go to the System Tray (located in the lower right corner of your screen).
Click on the Eject icon (a small green arrow over a hardware image).
2. A message will appear, detailing the devices that the Eject icon controls.
i.e. “Safely remove...” Click on this prompt.
3. You will then be given the following message. “Safe to Remove Hardware”.
It is now safe to disconnect the Newer Technology miniStack Classic.