Getting Started
Connecting Your Phone
This section is a reference guide to the basic functions and operations of your cordless
telephone. For more detailed descriptions of the operations and features of this telephone,
refer to the Contents on page 1.
1. Carefully remove your cordless telephone from its shipping carton. If there is any visible
damage, do not attempt to operate this equipment. Return it to the place of purchase.
2. Check to be sure you have all items that come with this cordless telephone system. You
should have a HANDSET, BASE UNIT, AC ADAPTOR, TELEPHONE LINE CORD, SHORT
TELEPHONE LINE CORD, and OWNER'S MANUAL.
3. Insert the small plug on end of the AC ADAPTOR into the POWER IN CONNECTION JACK
at the back of the BASE UNIT.
4. Plug the AC ADAPTOR into a 120V AC wall outlet.
USE ONLY WITH CLASS 2 POWER SOURCE 12V DC, 200mA.
5. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and
the other end into the TELEPHONE LINE CONNECTION JACK on the back of the BASE
UNIT. (If you have an older 4prong TELEPHONE JACK, you will need an RJ11C
TELEPHONE JACK ADAPTOR. This adaptor is available at the same place you purchased
your telephone.)
8
IN USE
CHARGE
PA G E
PA G E
VO
LU
ME
SC
AN
REDIAL/PAUSE
FLASH
MEMO
TALK
TELEPHONE
JACK
TELEPHONE LINE
CONNECTION
JACK
120VWALL
OUTLET
AC ADAPTOR
TONE/PULSE
SELECT SWITCH
Basic Operation
OPER
0
WXYZ
9
Receiving Calls with the HANDSET ON THE BASE UNIT
1. When the phone rings, lift the HANDSET.
The IN USE LED indicator will light up.
NOTE: The HANDSET RINGER ON/OFF
switch must be in the "ON" position for
ringer to operate.
2 . Press the TALK button.
3. Start your conversation.
4. To end your conversation, either press the
button or place the HANDSET on
the BASE UNIT. If you place the HANDSET
on the BASE UNIT CHARGE CRADLE,
you activate the automatic STANDBY feature.
Receiving Calls with the HANDSET off the BASE UNIT
1. When the phone rings, press the button. The IN USE LED indicator will light up.
2. Start your conversation.
3. To end your conversation, either press the button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE CRADLE, you
activate the automatic STANDBY feature.
Storing Numbers
1. Be sure the BASE UNIT IN USE LED indicator
is off and the HANDSET is in STANDBY mode
(See Special Features Section).
2. Press the MEMO button.
3. Dial the number you want to store.
4. Press the MEMO button again.
5. Dial the TELEPHONE KEYPAD
button where you want to store
that number. You will hear one
confirmation "beep".
6. Repeat steps 1 through 5 to store other
telephone numbers.
TALK
TALK
TALK
11
MEMO
TALK
VO
LU
M
E
SC
AN
REDIAL/PAUSE
