5.
OPERATION INSTRUCTIONS
WARNING! NEVER OPERATE YOUR NIGHT VISION DEVICE IN DAYLIGHT
AREAS WITHOUT THE LENS COVER ON!
NEVER DIRECT THE LENS IN THE DIRECTION
OF BRIGHT LIGHT!
5.1 Pre-starting procedures:
1. Unpack the device. In order to install the battery, first make sure the
switch (1) is in the OFF position. Unscrew the battery house cover (5), and install 2
fresh AA batteries. Observe the correct polarity indicated on the housing. Screw the
battery house cover back on. Check the functioning of the device by switching it on
(rotate switch 1) and looking through eyepieces (4). (Make sure the lens cap is on
while operating during the daytime). If power supply and the batteries are O.K., you
will see greenish-lit screen. If the screen is not lit, check the batteries. Replace the
batteries if necessary. If everything works, now is a great time to fill the warranty card.
2.
COMPONENTS
NVS7-2/4X / NVS7-2/4XHD
is supplied with the following components:
NAME
QUANTITY
BN5-2M 1
Head Set (optional)
1
Lens caps
1
Manual 1
Warranty Registration Card
1
3. SPECIFICATIONS OF
NVS7-2/4x / NVS7-2/4xHD
Image Intensifier
Generation 2+ or 3
Magnification: 4
Field of View
40
°
Focus range, m
0.25-
∞
Interpupillary distance
58-72 (Automatic)
Dyoptric correction
±
5
Power supply
3V (2AA)
Battery life, hours
20 hours with I/R 50 hours without I/R
Dimensions, inches
5.9”x4.7”x2.2”
Dimensions, mm
150x120x55
Weight, just the goggles
1 lb.; 0.480 kg
Gross shipping weight
2.4 lb.; 1.1 kg
NOTE:
As the design is being continuously improved some descriptions
may differ from those given above.
