11
Changing battery
To install a battery:
Slide the battery compartment cover down (9, Fig. 2)
Install the battery observing polarity
Don’t apply superfluous strength while pushing the battery
inside the compartment.
Close the compartment cover
If the battery does not fit the compartment easily, it means that
either polarity was reversed or the battery contacts are jammed..
To take a battery out:
Slide the battery compartment cover down (9, Fig. 2)
Shake the rangefinder gently towards the open end of the
battery compartment
Pull out the battery
The unit is fully operational when battery voltage is higher than
6.2V. A ‘
LOW BATTERY’
warning is displayed when battery
voltage falls below 6.5V.
Ni-MH rechargeable batteries capable to sustain current drain up
to 250 mA could be used to power the System.
Note:
If other than non-magnetic battery is used calibrate the unit
after changing the battery (see
Compass calibration
below for
more details).
Содержание LRM 2000PRO
Страница 1: ...Operation Manual LRM 2000PRO LASER RANGE FINDER MONOCULAR 105 Sparks Ave Toronto ON M2H 2S5 Canada...
Страница 2: ...ii...
Страница 32: ...NEWCON OPTIK Printed in Canada R1 4 11...