16
Standard1
: distance is displayed in meters, azimuth is
measured, crosshair reticle is visible, auto target selection is
used;
Standard2
: distance is displayed in yards, elevation in
degrees
At start the unit assumes
Ready to Measure
mode with
measurement parameters inherited from the previous setup. At
manufacturing stage the unit is set up into Standard1 set of
measuring parameters.
Mode switching
Pressing M button (3, Fig.1) in
Ready to Measure
mode switches
the unit between modes of operation:
Ready to Measure
–
Ready
(9, Fig. 3) is displayed
Quick link to Standard1 set of measurement parameters
(display name:
Std1
),
Quick link to Standard2 set of measurement parameters
(display name:
Std2
)
Setup
mode (display name:
COdE
),
Data Recall
mode
(display name:
rEc
) and
Memory Clear
mode (display name:
cLr
).
Flashing display name indicates the mode which can be selected
by pressing A button (6, Fig.1).
Содержание LRM 2000PRO
Страница 1: ...Operation Manual LRM 2000PRO LASER RANGE FINDER MONOCULAR 105 Sparks Ave Toronto ON M2H 2S5 Canada...
Страница 2: ...ii...
Страница 32: ...NEWCON OPTIK Printed in Canada R1 4 11...