NewAir NIM030SS00, Руководство пользователя

Страница: 7 / 50

EN
www.newair.com
7
SAFETY INFORMATION & WARNINGS
To reduce the risk of fire, explosion, electric shock, or injury when
using your ice maker, follow these important safety instructions:
•
Before using check that the voltage power corresponds to the one shown on
the appliance nameplate.
•
Do not remove any safety, warning, or product information labels from your
ice maker.
•
Plug the ice maker into an exclusive grounded outlet. No other appliance
should be plugged into the same outlet. Be sure that the plug is fully inserted
into the receptacle.
•
This appliance must be grounded. It is equipped with a cord having a
grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
•
Avoid the use of an extension cord because it may overheat and cause a risk
of fire.
However, if it is necessary to use an extension cord:
•
Use only extension cords with grounding plug.
•
The marked rating of an extension cord must be equal to or greater than the
rating of this appliance.
•
It should be positioned such that it does not drape over the counter or
tabletop where it can be pulled on by children intentionally.
•
Do not operate any appliance with a damage cord or plug or after the
appliance malfunction or has been damaged in any manner. Return the
appliance to the nearest authorized service facility for examination, repair or
adjustment.
•
Do not let cord hang over edge of table or counter.
•
Do not place on or near a hot gas or electric burner, or in a heated oven.
•
Place power cord in such a way it cannot be pulled on by children or cause a
tripping hazard.
•
Place power cord in such a way that it is not in contact with hot surfaces.
•
The use of attachment not recommended or sold by manufacturer may
cause fire, electric shock or injury.
•
Do not touch the ice-making parts when using the ice maker or making ice to
avoid being suffer from frostbite.
•
Do not immerse any part of the product in water.
•
To disconnect, turn any control to “OFF”, then remove plug from wall outlet.
•
Do not plug or unplug product with wet hands.
•
Unplug the product before cleaning, maintaining and when not in use.