NewAir NIM030SS00, Руководство пользователя

Страница: 12 / 50

EN
www.newair.com
12
USING YOUR ICE MAKER
1. Ensure that the drain plug at the back of ice maker is closed well.
2. Plug the ice maker into the wall outlet, the “ ” indicator flashes.
NOTE: Please make the ice maker rest for 30 minutes before plug if it has
been moved.
3. Open the front lid and remove the ice basket.
4. Fill the water reservoir with drinking water.
NOTE: Do not fill above the MAX water level mark.
5. Replace the ice basket and close the front lid.
6. Press the “ ” key and the “ ” indicator lights solidly.
7. The ice-making cycle will last approximately 20-30 minutes, depending on
the ambient temperature and water temperature.
8. The ice-making assembly is equipped inside of appliance, and the ice-
making assembly will keep producing ice when the water is pumped into it.
When the ice forms in the ice-making assembly, the ice cubes will be
transferred into the ice tray and then the ice cubes will drop into the ice
basket. And the above action will be repeated until the ice basket is full.
9. The “ ” indicator will light up when the ice basket is full and then the
ice maker will stop the ice-making cycle automatically. Open the front lid
and gently remove the ice from the ice basket with the ice scoop. And then
replace the ice basket and close the front lid, then the ice maker will
restart its ice-making function automatically. If the ice is not removed,
after about 8 hours, the appliance will automatically work again,
alternatively, you can press “ ” key to restart the appliance.
10. The “ ” indicator will flash when the water reservoir is lack of water.
(a) If the appliance is connected with external water source by the 1/4PE
tube shown in the section of “ CLEANING AND MAINTENANCE ” (see
Fig.1), the water reservoir will be refilled with water automatically and
the appliance will restart the ice-making cycle; alternatively, the user
can remove the ice basket and refill the water reservoir with water to