4
newair.com
GENERAL SAFETY RULES
Read all of the Instructions before using this appliance. Follow basic
safety precautions, including the following:
•
Use this appliance only for its intended purpose and as described in this
manual.
•
This chest freezer must be properly installed in accordance with the
grounding instructions in the installation section before it is used.
•
Never unplug your chest freezer by pulling on the power cord. Always grasp
the plug firmly and pull straight out from the outlet.
•
Repair or replace immediately, all electric service cords that have become
frayed or otherwise damaged. Do not use a cord that shows cracks or
abrasion damage along its length, the plug or the connector end.
•
Unplug your chest freezer before cleaning or before making any repairs.
•
Do not touch the cold surfaces in the chest freezer compartment,
particularly when hands are damp or wet. Skin may adhere to these
extremely cold surfaces.
•
Do not refreeze foods, which have been thawed completely.
•
This chest freezer is designed for freestanding installation only.
•
Do not operate your chest freezer in the presence of explosive fumes.
•
This appliance is not intended for use by persons, including children, with
reduced physical sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the
appliance.
•
Do not use extension cords or ungrounded (two prong) adapters.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similar qualified person in order to avoid hazard.
•
Keep ventilation openings in the appliance clear of obstruction.
•
Do not use mechanical devices or other means to accelerate the defrosting
process other than those recommended by the manufacturer.
•
Do not tamper with the refrigerant circuit.
Содержание 810028282377
Страница 7: ...7 newair com ELECTRICAL CIRCUIT DIAGRAM...