INSTALLATION INSTRUCTIONS - GAS
LP GAS ONLY
Do not install this appliance in a room
below ground level. This does not pre-
clude installation into rooms which are
basements with respect to one side of the
building, but open to ground level on the
opposite side. In the Republic of Ireland,
refer to relevant Irish Standards for cor-
rect ventilation requirements.
Failure to install appliances correctly
is dangerous and could lead to pros-
ecution.
Moving the cooker
Please note that the weight of this
appliance is approximately 45kg
(500mm wide models), or 50kg
(550mm wide models) (unpacked).
Take care if the appliance needs to be
lifted during installation - always use
an appropriate method of lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open
the door and grasp the frame of the
cooker, taking care that the door does
not shut on your fingers.
Take care to avoid damage to soft or
uneven floor coverings when moving
the appliance. Some cushioned vinyl
floor coverings may not be designed
to withstand sliding appliances without
marking or damage.
CLEARANCES & DIMENSIONS
CLEARANCES
No shelf or overhang or cooker hood
should be closer than a minimum of
460 mm, but check with cooker hood
manufacturer’s recommendations.
The cooker must have a side clearance
above hob level of 90mm.
To avoid damage to surrounding
units a 10mm gap should
be left between the appliance
and the units.
If this is not possible,
a kit (part number 0125552 00) may be
ordered
from Customer Care which will
protect the units.
For models with side opening doors,
we recommend a side clearance of
60mm between the cooker and any
side wall to allow the door to be
opened fully.
Cooker dimensions
All sizes are nominal, and some
variation is to be expected. The
‘depth’ of the cooker, as given below,
is to the front of the door and
excluding knobs and handles.
Width is either 500mm or 550mm,
depending on model.
