USING THE MINUTE MINDER (IF FITTED)
ELECTRONIC MINUTE MINDER
The digital timer enables you to set the
time of day (24 hour clock) and the min-
ute minder alarm.
Setting the “Time of Day”
•
Switch on the electricity supply to the
appliance.
• The display will flash.
•
Press and release the time of day
button.
•
Set the time of day with the plus and
minus buttons.
•
The time will be set 7 seconds after
the last plus or minus operation.
Alarm tones
After setting the time of day, you can
select one of three alarm tones.
Press the minus button to listen to the
first tone, then release the minus button
and press it again to listen to the second
tone, etc.
Releasing the minus button after a tone
has sounded will automatically select that
tone.
Setting the minute minder
•
Press and release the plus button to
change the display from clock to min-
ute minder - the bell symbol will light.
•
Use the plus and minus buttons to
set the length of time before the
alarm tone will sound. The display will
increase/decrease in units of 10 sec-
onds up to 99 minutes 50 seconds,
and in units of 1 minute from 1 hour
40 minutes upwards. The maximum
period which may be set is 10 hours.
The display format will change after 99
minutes and 50 seconds to 1 hour and 40
minutes.
During countdown, the minute minder has
priority on the display, which will show (in
minutes : seconds, or hours : minutes)
the time remaining.
When countdown is complete, the tone
will sound for 7 minutes, or it can be reset
with one touch of any button.
To cancel the minute minder at any other
time, run down the set time with the
minus button.
The display will revert to show the time
of day.
MECHANICAL MINUTE MINDER
Turn the minute minder control knob fully
to the maximum setting, then turn back to
the desired setting.
When countdown is complete, the timer
will give a audible signal for a few seconds
before it stops.
11.200
