Wall fixing
(figures 4 & 5A / 5B)
•
Drill 8 mm diameter holes as shown.
•
Using the screws and dowels
supplied with the appliance, fasten
the wall bracket to the wall.
• Ensure that they are suitable for the
type of wall where the cooker
hood is to be mounted.
•
Fig 5A :Locate and fasten the
hood to the wall through holes C,
and secure through holes D.
•
Fig 5B: Drill holes A in the wall,
making sure that they are in line
with the distances quoted.
•
Locate the 2 junction pieces as
shown. Secure the top junction
piece to the wall bracket through
the side holes using the screws
provided.
•
In some cases it may be necessary
to adjust the length of one or both
of the chimney sections. Cut the
bottom of each section so that the
cut is hidden using suitable cutting
implements. Please take care not
to obstruct the ducting vents used
in the re-circulation method.
Re-circulation mode only
•
Since the side vents are located in
the upper chimney section, no
L-shaped air flow directing piece is
required.
9
Installation
20 mm
260 mm
A
C
235 mm
Figure 4
Figure 5A
A
C
492 mm
D
wall bracket
adjustable
40
mm
Figure 5B
