New Wave Research LCS 4/EzLaze, Руководство оператора

Страница: 7 / 43

Laser Safety
3
Read this section completely before installing or operating
the LCS4/EzLaze.
WARNING: The New Wave Research, Inc. LCS 4/EzLaze is a Class
IIIb laser system. AVOID DIRECT EXPOSURE TO THE BEAM.
WARNING: Improper installation, adjustments, use of controls or
performance of procedures other than those specified herein may
result in hazardous radiation exposure. The 1064 nm and 355nm
output beams are invisible to the human eye. Use appropriate
caution to avoid PERMANENT EYE DAMAGE or BLINDNESS.
CAUTION: Follow the instructions contained in this manual for
proper installation and safe operation of the laser system. Wear
protective eye gear as appropriate. Refer to ANSIZ 136.2 “Standard
for the Safe Use of Lasers”, available from the
Laser Institute of America, tel. (407) 380-1553.Install the eyepiece
filter as specified in this manual. Keep your eyes out of the directed
and reflected beam paths. Laser radiation reflected off a mirror-like
surface is also dangerous.
WARNING: Never look into the laser aperture when the laser is
operating or has the potential to fire. At all times, avoid exposure to
direct or reflected radiation which exceeds the accessible emission
limits listed in “Performance Standards for Lasers Products”, 21
CFR 1040 10(d).
DANGER: HIGH VOLTAGE AND CURRENT. The laser head and
power supply contain electrical circuits operating at lethal voltage
and current levels. Do not remove the cover from the laser power
supply or laser head. Serious injury or death may result.
GENERAL