New Security Technologies H.264 Pentaplex, Руководство пользователя

Страница: 102 / 108

H.264 Pentaplex DVR
102
You must set your network environment properly to use remote control software (Net Viewer or Web Viewer).
1.Ping Test through your Router
Ping is a command-line tool used to check whether another computer is reachable from your own. You can
use the command either from the Windows Command Prompt or from a Linux terminal. The following
shows the sample output under Windows: Type “ping DVR IP address” (e.g. ping 192.168.0.26). If DVR and
your computer are in same intranet (LAN) and are connected each other through router, you will see
successful ping test.
If you get time out message at ping test, you should fix this problem before going to next step.
• Check if DVR and computer are in same intranet.
• Check if there are other computers or devices that have same IP address in same intranet.
• Check if IP address, subnet mask and gateway address are correct.
2. Direct ping test without Router
You can do ping test simply with direct connection between PC and DVR. If it fails, please check your
intranet (LAN) configuration.
• Connect PC and DVR using Crossover LAN cable (usually orange color).
NETWORK TROUBLESHOOTING