New Rock Technologies OM20, Руководство по установке и настройке

Страница: 43 / 69

www.newrocktech.com 5-43
Item Description
Batch
configuration
Configure extensions in batch mode. Batch mode allows the configuration of
multiple parameters for multiple extensions at once.
Batch
renumbering
Modify extension numbers in batch.
Port Analog extension port (FXS port) on the device.
Enable Select to use this line. By default, the line is enabled.
Number Number of the analog extension. The allocated numbers start from 200 by default.
PIN
Used for verification when operating via *33 and *99 navigation.
Note:

The caller can perform the operations according to the *33 and *99 menus on
analog phone. See the OM User Manual .

Both DISA and Authorization with PIN use this PIN, which is also used to set
automatic downloading by an IP phone.
Display as
Set the display name of the analog or IP extension. This feature is only limited to
calls between extensions, and it requires that the name display feature be supported
at the called terminal.
If display names are configured on both the OM and the IP extension, the display
name configured on the OM prevails.
Group
Select a department for the extension. The extensions within the same department
can use group call pickup.
Call restriction
Each extension has an assigned privilege for making outbound calls. When a user
makes a call beyond its restriction, the device rejects the call with a voice
announcement. If extension A is allowed only to make internal calls, when it tries
to make outgoing call, the following announcement is heard, “Sorry, you are not
authorized to make outgoing call, please contact the administrator.” By default, the
extension is allowed to make long distance calls.

Internal: Internal calls are allowed.

Local: Internal calls and local calls are allowed.

Long distance: Internal calls, local calls, and long distance calls are allowed.

International: Internal calls, local calls, long distance calls, and international
calls are allowed.

Prohibited:
The extension is only allowed to receive calls.
Email
Enter e-mail address to forward the call recording file or voicemail file to the user
via email. For information on settings for voice mail, see 2.5.2 Voicemail.