Shanghai New Rock Technologies Inc. Page32/75
Name
Description
Hot Line
Select if the OM is required to automatically dial out the preset hotline
number after offhook. By default, hot line is disabled. It supports two
types:
z
Immediate: Automatically dial out the preset hotline number after
offhook.
z
Delayed: Automatically dial out the preset hotline number after
offhook with a time of 5 seconds.
Hot Line Number
After the hotline function is activated on this line, the hotline number
must be entered here.
Forking
Select if the Forking is activated. Forking allows the gateway to initiate a
call to another telephone terminal while ringing on this line terminal, and
the answer by either terminal will end up with ringing of the other
terminal.
Forking Number
Forking allows the OM to initiate a call to another telephone terminal
(eg. the user’s mobile phone) preset by users while ringing on this
extension; and the OM will immediately end up the call on another
terminal when users lift off the hook on either terminal. The
administrator can set numbers corresponding to forking terminals in this
parameter, and users can set it through telephone.
Voice Mail
Select if Voice Mail is activated.
Black list
Enter the list of phone numbers which OM should reject. separated with
“,”. e.g.: 02161243400,1305678899
Caller ID
Set if Caller ID display is activated on this line. By default, this is
selected.
Note: In addition to number display, the Caller ID can display the names
of incoming calls as long as terminal equipments support.
CID on call waiting
Select if Caller ID Display is activated on this line during call waiting.
By default, this is not selected.
Extension pickup
Select if Pickup is activated on this line.
CW
Select if Call Waiting is activated on this line.
CH
Select if Call Hold is activated on this line. By default, this is activated.
Note:
If this function is activated, the OM will automatically activate Call
Transfer.
CT
Select if Call Transfer is activated on this line. By default, this is
activated. Example: When A calls B, B picks up the call and transfers it
to C. Note: The Call Hold must be activated before Caller Transfer.
OT
Outbound Transfer. This parameter is used with Call Transfer. Select if
users are barred for outbound call transfer. By default, this is disabled.
DND
Select if “Do Not Disturb” is activated on this line. By default, this is not
selected.
Recording
Select if telephone Recording is activated.
Enable
Select if the line is set to maintenance status, namely, stop to supply of
power for the line port. In this status, the line fails to be used normally.
The administrator can disable the extension by setting the line to off
status.
