Shanghai New Rock Technologies Inc. Page24/75
Figure 2-3
Network Configuration Interface
Table 2-3
Configuration parameter of Network
Name
Description
Host name
This is the equipment name of OM. The default values of OM10, OM20,
OM100 and OM200 are Officium10, Officium20, Officium100 and
Officium200 respectively. Users can set a different name for each OM to
distinguish from each other according to the deployment plan.
A host name can be a maximum of 48 characters, either letters (A-Z or
a-z), numbers (0-9) and minus sign (-). It may not be null or space, and it
must start with a letter.
Logical IP address
This parameter only exists in OM100 and OM200, used to display the
actual OM IP address in use.
ETH
MAC address
Display the MAC address of OM.
IP address
assignment
Methods for obtaining an IP address
z
Fixed: Static IP address is used;
z
DHCP: Activate DHCP service and use the dynamic host configuration
protocol (DHCP) to allocate IP addresses and other network
parameters;
z
PPPoE: PPPoE service is used.
User name
Enter an authentication user name if PPPoE service is selected, and there
is no default value.
Password
Enter an authentication password if PPPoE service is selected, and there
is no default value.
