NEW POL 251CO, Руководство пользователя, Страница: 26 / 64

SM1733
26
RECOMMENDATIONS
■
Always add a softener to the
wash. This will improve the
drying results and reduce
drying time.
■
The layer of fibre threads in
the filter is not the result of
the drying procedure.
The threads come from the
MAINTENANCE
ELECTRONIC MODEL TROUBLESHOOTING
If the machine is not working
properly, carry out the following
checks before calling for techni-
cal assistance:
1. The program will not start:
■
The plug is not inserted
in the mains socket.
■
The door is not closed
properly.
■
The ON/OFF button has
MECHANICAL MODEL TROUBLESHOOTING
If the machine is not working
properly, carry out the following
checks before calling for techni-
cal assistance:
1.
The program will not start:
■
The plug is not inserted
in the mains socket.
■
The door is not closed
properly.
■
The ON/OFF button
has not been pressed.
DIMENSIONS:
fibres of fabrics damaged or
unthreaded during the wash
and, above all, as a result of
wear.
GB
not been pressed.
2. The program has been set,
the indicator light is flash-
ing, but the drier does not
start:
■
position the programmer
on “STOP”, wait for the
audible signal and set the
program required.
3. The drier does not dry
within the set time:
■
Check that the filter is
clean.
■
Check that the correct
program has been se-
lected.
■
Check that the air sup
ply is not blocked.
If the problem is not
caused by one of the
above, call technical
assistance.
Width cm:
Height cm:
Depth cm:
Dimensioni:
60.0
85.0
60.0
5 kg (
dry)
see characteristics plate
see characteristics plate
Max. capacity
Power rating
Voltage
■
The START button has
not been pressed.
2. The program has been
set,the indicator light is
flashing, but the drier
does not start:
■
position the program
mer on “STOP”, wait for
the audible signal and
set the program re quired.
3. The drier does not dry
within the set time:
■
Check that the filter is
clean.
■
Check that the cor
rect program has
been selected.
■
Check that the air sup
ply is not blocked.
If the problem is not caused by
one of the above, call technical
assistance.