IP POWER 9212 USER MANUAL
B. Light : This device can control 9202 / 9212 (IP Power) - by change the default setting of :
Normal close or normal open
C. Motor : This device can control 9203(IP Motor) –control the direction of turning..
3. Controlled IP Address: Setting the Ip Address of controlled device .
In Inter - control mode when transfer , . the Out Light(P6.1/P6.2) will always on
，
if the main controller
freeze the Out Light P6.1 is always on
，
if the controlled device freeze , the light of P6.
2 is always on.
。
2-1 For example : Control Ip Motor by DI board of IP Power 9212
Step 1 : Go to SETUP , change Connect Client and set as Motor ,
Step 2 : key in the IP address of controlled device (IP Motor)
Step 3 : Click Submit to confirm setting , when the count windows is off , the new login windows
jump out as following pictures.
SMTP for E-Mail : receive IP address & inform as Sensor trigger
IP Power can setup the e-mail address for receive change from sensor part . As setting up the receiver
e-mail address, IP Power will send its IP Address to receiver .
VER. X.X,
- 19 -
