IP POWER 9212 USER MANUAL
3. If can not get in the 92XX web page , please set the segment of IP 9060(A) to be same as your PC.
* You can get your PC network information – IP Addres, Subnet Mask and Default Gateway by step: start
execute key “cmd” in dialog
key “ipconfig” in MS-DOS mode
The last digit of IP address can be any number between 1~254, but can not
be
same as your PC.
If
using in any PC, just use HUB and type the 192.168.0.100 in Browser or use “ipedit.exe “ then you can get
in the webpage.
* Same
SEGMENT
: The first 3 number of IP address is same - XXX.XXX.XXX.abc. The part of
XXX is same. Fro Example : IP address is
192.168.1
.100 ,
then another IP address
192.168.1
.123 is the IP
in same segment .
4. The default username and password of IP Power 9212 are:
Username: admin
Password: 12345678
If forget the new password , you can key in superuser in username , and hardware reset the device to set
the default setting Password :
12345678
。
( for security concern) ).
5. Please refer software - Infinity Cam to use IP Power , IP Sensor , IP Kamera & IP Video in one video
screen.
6.
Note
: if stay for long time as in webpage , you would be unable setting and see message
“ Cookie time
out “ , please go to
IE to change setting: “ Tools “ “ Internet operations ” , please click “ Delete
Cookies “ and “Delete files “ in “ Temporary Internet file “.
VER. X.X,
- 13 -
