New lift ADM 3, Руководство пользователя

Страница: 20 / 24

ADM-XK land call module
Terminalassignmentandconfiguration
16 ADMmanual
6.3 Terminal assignment and configuration
°: 5 x 70 mA or 350 mA in total
*: 4 x 140 mA or 560 mA in total
6.3.1 Bus connection X21, X22
ADM-XK X21 / X22 Colour code Signal / function
1 black RS-485 LON Bus "A"
2 white RS-485 LON Bus "B"
3 red +24V supply
4 violet GND or 0V supply
6.3.2 Terminal strip X1
Terminal Function Technical data
1, 3, 5, 7 Occupied display O; L; 140 mA / 24 V *
2, 6 GND P
4 Key switch 2 (switched in parallel or jointly used with
terminal 8 - 16, 18, 20, 22, 24, 26)
I; L
8 Key switch 1 I; L
9, 11, 13, 15 Direction UP O; L; 140 mA / 24 V *
10, 12, 14, 16 Direction DOWN O; L; 140 mA / 24 V *
17, 19, 21, 23, 25 +24V P
18, 20, 22, 24, 26 Release O; L; 70 mA / 24 V °
27 Landing call 00 UP I/O; L; 250 mA / 24V
28 Landing call 00 DOWN I/O; L; 250 mA / 24V
29, 31, ..., 53 Landing call 01 UP, landing call 02 UP, ... landing call 13
UP
I/O; L; 250 mA / 24V
30, 32, ..., 54 Landing call 01 DOWN, landing call 02 DOWN, ..., landing
call 13 DOWN
I/O; L; 250 mA / 24V
6.3.3 Jumpers
The J1 - J4 jumpers determine the assignment of the plug connections to the floors and door sides of the lift.
The jumpers are set according to the following diagram and are set to the defaults on delivery:
J4 J3 J2 J1 Binary value
open open open open 0000
open open open plugged 0001
open open plugged open 0010
open open plugged plugged 0011
open plugged open open 0100
open plugged open plugged 0101
open plugged plugged open 0110
open plugged plugged plugged 0111
plugged open open open 1000
plugged open open plugged 1001
plugged open plugged open 1010
plugged open plugged plugged 1011
plugged plugged open open 1100
plugged plugged open plugged 1101
plugged plugged plugged open 1110
plugged plugged plugged plugged 1111