New Leader NL4500G4, Руководство оператора

Страница: 41 / 152

- 41 -
NL4500G4 TRIDENT
www.New-Leader.com
(800) 363-1771 313974-AA-B
Header
The Case IH NL4500G4 EDGE Trident is a hopper type spreader intended for spreading free fl owing
granular agricultural materials, such as chemical fertilizers, agricultural limestone, and gypsum. It is
intended for mounting on the Case IH 5550 Trident - a high-clearance post-emergence application vehicle.
The unit is hydraulically powered and provides independent variable speed control for the spinner and full
automatic ground speed control for the conveyor.
The conveyor delivers material to the spinners through an adjustable metering gate at the rear of the
hopper body. An orbital type hydraulic motor mounted to a 6-to-1 ratio spur gear case drives the conveyor.
The conveyor is a 30-inch (76cm) wide #4 belt-over-chain (BOC) type conveyor consisting of parallel strands
of pintle chain joined by crossbars every other link. Moderately oil-resistant (MOR) belting is fastened to
the top side of the conveyor at each crossbar.
The spinner assembly has two 24-inch (61cm) diameter dished discs. Each disc has four formed and heat
treated fi ns that are adjustable to radial angle. The spinner is fully adjustable by means of a rotating handle.
The op onal 304 stainless steel hopper style spreader M A or M B may be insterted in the main bin.
• Inserting the M
ULT
A
PPLIER
allows for two separate materials to be spread simultaneously. It features a
24-inch (61cm) wide #4 belt-over-chain type conveyor consisting parallel strands of pintle type chain
joined by cross bars every other link. Moderately oil-resistant belting is fastened to the conveyor at
each crossbar. The direct-driven conveyor is also controlled independently enabling the delivery of
material at variable rates through the adjustable gate at the rear of the hopper body. The hillside
divider improves material placement on the spinner for a more effective spread pattern.
• Inser ng the M B will convert the spreader to a 3 or 4 hopper unit, which can be used independently or
together for straight and variable rate applica ons. The front two hoppers dispense fer lizer products while
the single or dual hopper at the rear dispense(s) micronutrients or seeding products. The rear bin(s) are sloped
forward to improve chassis weight distribu on. Material is delivered from the front bins by conveyor through
adjustable metering gates. The rear bin(s) deliver material through a meter wheel system. Bin sensors are installed
in all bins to warn when materials are low in each micronutrient bin.
The M B also comes equipped with an upper and lower material divider which improves material placement
on the spinner for a more eff ec ve spread pa ern.
An op onal micronutrient stainless steel cover which opens and closes with a stainless steel air cylinder is available.
Screens installed on micronutrient bins keep large chunks of material out of the bins by breaking the material up
as it enters the bins.
The optional 304 stainless steel M
ULT
A
PPLIER
may be insterted in the main bin at any time.
This product is intended for commercial use only.
General Description