New Leader NL4500G4 страница 145 Скачать руководство пользователя

Страница: 145 / 152

- 145 -

NL4500G4 TRIDENT

www.New-Leader.com
(800) 363-1771

313974-AA-B

Header

Spread pattern is affected by many factors. Among the more signi

cant of these are:

• Spinner speed

• Height of spinners from ground

• Point of material delivery on spinner discs

• Spacing of swaths (driving centers)

• Angle of the distributor

ns on the spinner

discs

• Wind and humidity

• Condition of spinner

• Rate of material delivery

• Material granule size

Since many of these factors will vary for each job, trial and experience must be used to determine the

adjustments required to obtain the swath width and spread pattern desired. The following instructions

outline the adjustments available and the effect that each will have on the spread pattern.

Spread Pattern Test Kit

WARNING

Use great caution while working around the spreader. Contact with spinners and

other moving parts is very dangerous. Do not adjust while machinery is moving, wear

eye protection and avoid discharge from spinners. Do not ride on moving spreader.

NOTICE!

Spinner assembly and material divider have NOT been adjusted at the factory. Before spreading

material, spread pattern tests must be conducted to properly adjust the spread pattern. A spread

pattern test kit (part no. 300508) is available for this purpose.

THE MANUFACTURER OF THIS SPREADER WILL NOT BE HELD LIABLE FOR MISAPPLIED

MATERIAL DUE TO AN IMPROPERLY ADJUSTED SPREADER.

It is recommended that spread pattern tests be conducted prior to each spreading season, after any

spreader maintenance, before applying a new product, and periodically during the spreading season.

Spread pattern tests must be performed for each product, blend and application rate.

Spread Pattern

Spread Pattern Test Kit, part no. 313960 , includes the following:

DESCRIPTION

QTY

DESCRIPTION

QTY

Box - Plastic Storage

Scale – Density

Center Collection Tray - Blue

Data Sheet – 100 Ct.

Booklet

Collection Tray - Brown

Funnel

Divider Screen

Flag

Assy – Test Tube Rack

Rope – 120’ marked

Test Tube

Stake

Содержание NL4500G4

























































































































































Результаты поиска

Содержание NL4500G4

Отзывы:

Похожие инструкции для NL4500G4

Бренды по названию

Популярные бренды

New Leader NL4500G4, Руководство оператора

Результаты поиска

Содержание NL4500G4

Отзывы:

Похожие инструкции для NL4500G4

Бренды по названию

Популярные бренды