New Horizons MAJESTIC, Руководство пользователя

Страница: 52 / 104

36
The Suburban furnace installed in your unit is a forced-air furnace
fueled by LP gas. The furnace is controlled by the multi-zone wall
thermostat. This thermostat controls both the heating and cooling of the
coach.
The heat is supplied to the unit through ducts located in various areas. The
furnace will not operate properly if the airflow at the floor registers or the
air return to the furnace, is blocked by personal or storage items. Storage
under the cabinets should be done carefully to prevent crushing or
damaging the furnace ducting or blocking of the warm air return.
Smoke and fumes may be created as a result of the residual burn off
the manufacturing compounds that are sometimes present the first
time the furnace is used. This is normal. To minimize the smoke and
fumes, the initial lighting of the furnace should be done with the
windows and doors open. Continue until the residue is completely
burned off.
To operate the furnace:
1.
Turn the thermostat to the ON position.
2.
In MODE select FURNACE.
3.
Depress FAN button and set fan speed to AUTO.
4.
Using the UP or DOWN buttons, set the temperature to desired setting.
For your safety, do not use gasoline or other flammable liquids in the
vicinity of the furnace or any other appliance. Clean the complete furnace
and air tube passageways periodically to remove dust, lint, etc. Check the
gas system for leaks at least once a year. Check and clean the blow wheel
annually.
WARNING
Use caution when washing the exterior of your RV. Water should not be
sprayed directly into the furnace vent. If water is forced beyond the rain
baffles into the furnace vent, rusting of the furnace could occur. This
could also cause improper combustion.
All LP Gas Appliances must be off while fueling tow vehicle!