SECTION 1 - GENERAL INFORMATION
1-2
This symbol means WARNING or PERSONAL SAFETY INSTRUCTION - read the
instruction because it has to do with your safety. Failure to comply with the instruction may
result in personal injury or even death
This manual is intended as a service and repair manual only. The safety instructions provided herein are for
troubleshooting, service, and repair of the MZ19H zero radius tractor. The MZ19H zero radius
tractor and
attachment operator's manuals contain safety information and operating tips for safe operating practices.
Operator's manuals are available through your New Holland dealer
.
THINK SAFETY FIRST
AVOID UNEXPECTED STARTING OF ENGINE...
Always turn off the engine and disconnect the spark
plug wire(s) before cleaning, adjusting, or repair.
AVOID LACERATIONS AND AMPUTATIONS...
Stay clear of all moving parts whenever the engine
is running. Treat all normally moving parts as if they
were moving whenever the engine is running or
has the potential to start.
AVOID BURNS...
Do not touch the engine, muffler, or other
components which may increase in temperature
during operation, while the unit is running or shortly
after it has been running.
AVOID FIRES AND EXPLOSIONS...
Avoid spilling fuel and never smoke while working
with any type of fuel or lubricant. Wipe up any
spilled fuel or oil immediately. Never remove the fuel
cap or add fuel when the engine is running. Always
use approved, labeled containers for storing or
transporting fuel and lubricants.
AVOID ASPHYXIATION...
Never operate an engine in a confined area without
proper ventilation.
AVOID INJURY FROM BATTERIES...
Battery acid is poisonous and can cause burns.
Avoid contact with skin, eyes, and clothing. Battery
gases can explode. Keep cigarettes, sparks, and
flames away from the battery.
AVOID INJURY DUE TO INFERIOR PARTS...
Use only original equipment parts to ensure that
important safety criteria are met.
AVOID INJURY TO BYSTANDERS...
Always clear the area of bystanders before starting
or testing powered equipment.
AVOID INJURY DUE TO PROJECTILES...
Always clear the area of sticks, rocks, or any other
debris that could be picked up and thrown by the
powered equipment.
AVOID MODIFICATIONS...
Never alter or modify any part unless it is a factory
approved procedure.
AVOID UNSAFE OPERATION...
Always test the safety interlock system after
making adjustments or repairs on the machine.
Refer to the Electrical section in this manual for
more information.
Find manuals at https://best-manuals.com
