New Holland EH45, Руководство по обслуживанию

Страница: 26 / 41

02
–1–9
5. TRANSPORTATION
LOADING MACHINE ON A TRAILER
1. Keep trailer bed clean.Put chocks against truck
wheels.
2. Use a ramp or loading dock. Ramps must be
strong enough, have a low angle, and correct
height. Load and unload machine on a level
surface.
3. Travel machine onto ramps slowly. Center the
machine over the trailer.
4. Lower all attachment.
5. Stop engine. Remove key from switch.
Do not put chains over or against hydraulic
lines, hoses or rubber tracks.
6. Fasten machine to trailer with chains or cables.
During transportation, the bucket or attachments
may hit the canopy or the cab. Therefore, set the
machine in the transporting position by observ-
ing following points:
1. Extend the bucket cylinder fully.
2. Extend the arm cylinder fully.
3. Lower the boom.
4. If machine cannot be transported with arm cylinder
fully extended, remove bucket or attachment and
extend arm cylinder.
(2) Transportation Dimention and Weight of Attachment
(1) Boom
SK40SR-
2
2,785 X 1,025 X 290
(9´-2˝ X 3´-4˝ X 11.4˝)
190 (420)
SK45SR-
2
3,015 X 1,045 X 290
(9´-11˝ X 3´-5˝ X 11.4˝)
220 (420)
Model
Length X Height X Width
mm (ft-in)
Weight kg (lb)
SK40SR-
2
1.36 (4´-6˝)
2,570 X 510 X 600
(8´-5˝ X 1´-8˝ X 2´-0˝)
230 (510)
SK45SR-
2
1.48 (4´-10˝)
2,700 X 510 X 600
(8´10˝ X 1´8˝ X 2´0˝)
250 (550)
Model
Arm length m (ft-in)
Length X Height X Width
mm (ft-in)
Weight kg (lb)
(2) Arm and Bucket (Japanese standard bucket)
L
H
L
H