7 - MAINTENANCE
General maintenance
Fuel injection system - Bleed
Bleed the fuel system if:
• It has been drained.
• A new filter element has been installed.
• The tractor has run out of fuel.
• The lines leading to or from the filter have been dis-
connected.
• The injection pump has been removed and rein-
stalled.
WARNING
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under
pressure can penetrate the skin and cause
infection or other injury. To prevent personal
injury:
Relieve all pressure before discon-
necting fluid lines or performing work on the
hydraulic system. Before applying pressure,
make sure all connections are tight and all
components are in good condition. Never use
your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood
for this purpose. If injured by leaking fluid, see
your doctor immediately.
Failure to comply could result in death or seri-
ous injury.
W0178A
To bleed the fuel system:
1. Make sure there is adequate fuel in the fuel tank.
2. Place key switch in the “ON” position.
3. Bleed the air from the fuel filter
(1)
, by pressing the
manual fuel feed pump
(2)
several times. The manual
feed pump will bleed the air back to the fuel tank. There
is no need to open any bleed ports in the fuel system.
NHIL13CT01251AA
1
7-33
Содержание Boomer 41
