New Cosmos Electric SDM-72, Инструкция по эксплуатации

Страница: 7 / 24

- 5 -
5-3. Measurement
1) Rotate the selector switch to “MEAS” to shift to measurement mode.
2) Check to see that the display indicates 0, and insert the sampling container containing
the sample grease into the sample port. (Refer to 5-4. Collection of Grease Sample for
sampling procedure of oil sample.)
* The sampling container must be inserted with the collected grease facing upward
(same direction as the front surface of the instrument.)
3) An audible beep will sound for 2-3 seconds after the sampling container has been
inserted indicating the measurement has been completed, and the reading is held, read
and record the reading.
4) When the sampling container with the holder is removed from the sample port, the
display will return to zero by the automatic zero adjustment function.
5) After the measurement, make sure to return the selector switch to “OFF” position.
This surface to face upward
when inserting
Sampling container
−5−