10
TROUBLE SHOOTING:
If the product fails to start or has other problems, please check as below:
Problem
Possible reason
Solutions
The Unit is not starting.
Power cord is not properly connected.
Check the power cord whether connected properly.
Ozone plate module is not fully inserted.
The ozone plate module whether inserted fully.
The Unit is starting but
display not light up.
Fuse has burnt out.
Replace the fuse
The Unit is starting but
only a little ozone.
The unit is not activated.
the ozone plate is dirty.
Activates the switch
replace new or clean the ozone plate
The Unit is starting
but no ozone.
The ozone plate is consumed.
activates the wait and delay function.
Replace a new ozone plate
Cancel the wait and delay function.
How to replace the Fuse:
Need to replace a new fuse when the previous fuse is breaks.
1.
Pull out the plastic fuse holder and take out the previous fuse.
2.
Take out the spare fuse which inside the plastic fuse holder and install it.
3.Reinstall the plastic fuse holder back into the power socket.
Please refer to the right picture:
If the above problems are excluded, the machine cannot be started or used normally, please contact the merchant
or customer service staff.
