background image

WARRANTY 

LIMITED FOUR YEAR WARRANTY 

FOR THE BUCK STOVE AND RELATED PRODUCTS 

 

PLEASE READ THIS WARRANTY CAREFULLY 
 
This  warranty  covers your new heating unit, so long  as  it  is owned by the original purchaser, 
including optional and  standard accessories purchased at the same time, subject to terms, 
limitations, and conditions herein set out.To make a claim under this warranty the Bill of Sale 
or Cancelled check must be presented. 
This warranty will not cover any damage and/or failure caused  by abuse or improper 
installation of the products covered. 
 

WARRANTY 

 
For  a five year period from the date of purchase, as long as the heater  is  owned by the original 
purchaser, NBC will  repair  or replace, at its option, any part defective in materials or  work-
manship,  with the exception of:  optional and standard  accessories, glass, gaskets and all parts 
not permanently attached to the heating unit.  Parts not permanently attached to the heating unit 
are defined as those  items  designed to be removed from  the  stove,  including 
those  removable with common hand tools. The cost of parts  only are  included. The customer 
pays any  labor  or transportation charges required. 
 
Electrical  motors, wiring, switches, gas components and all parts not permanently attached.are 
warranted for one (1) year from date of purchase.  Customer pays any transportation charges. 
 

PROCEDURE 

 
Should you feel that your heater is defective, you should contact any  NBC  dealer for the name 
of your nearest authorized  heater service  representative,  who  will instruct you  on  the  proper 
procedure. 
 

CONDITIONS AND EXCLUSIONS 

 
(A) Replacement of parts may be in the form of  new  or  fully reconditioned parts, at NBC's 

option. 

 

(B) There are no other warranties express or implied  including warranties or Merchantability, 

Fitness for Purpose, or  Otherwise except those warranties expressly stated herein. 

 

(C) NBC is not liable for indirect, incidental, or consequential damages in connection with the 

use of the product including any cost or expense of providing substitute equipment or 
service during periods of malfunction or non-use. 

 

Some states do not allow the exclusion of incidental or consequential damages, so the above 
exclusion may not apply to you.

 

30 

Содержание DV23ZC


































Отзывы: