2264ALB Limiter / Compressor
Issue 1
BYPASS / IN
When in
BYPASS
this switch connects the Input directly to the Output, in
effect bypassing all of the unit's circuitry. When set to the
IN
position,
the unit is in circuit.
SA (Slow Attack)
When this switch is in the
SA
(Slow Attack) position the attack time of the
Compressor section is slowed, for applications such as bus compression.
Whe the switch is not in the
SA
position the attack time is reverted to the
standard 2264 setting.
SIG (Signal Presence)
This LED lights when a signal is detected at the input to the unit.
Meter LEDs
These LEDs show the amount of Gain Reduction being applied to the
signal, and have an approximate PPM characteristic.
- 6 -
