TENNIS QUICK START GUIDE
The Nevco six court tennis scoreboard system consists of six wireless hand held controls (one for each court)
and one scoreboard that displays the scores for all six courts, plus the total score. Each control can send
information to the scoreboard for its corresponding court for both teams for 3 sets of play and total score.
The Nevco single court tennis system operates the same way as the six court system. The main aspect is that the
single court controller must be set to court 1.
Any of the controls can be programmed to control any of the six courts, including court 1. Multiple controllers
can be set to the same court. The controller designated as court 1 is the only controller that can control the
brightness level or clear the whole scoreboard at once.
Note:
Any controller can turn on the scoreboard, however when the court 1 control is turned OFF the
scoreboard is blanked. Please make sure that all other controllers are powered down as well in order to conserve
battery life.
Note:
It is assumed that each control has been configured for a court and that the court 1 control has been linked
to the desired receiver(s). Both functions are explained in the setup guide that comes with a new control. One
control is set to “court 1” by default at the factory; however it can be set in the field from the OPTION menu if
needed. (See pages 8 and 9 for detailed instructions).
Turn the scoreboard power ON first. Wait approximately 10 seconds before turning the controls on and make
sure each controller is initialized before powering on the next controller. Verify the court that each control is
configured to operate.
Press
The control will display a greeting while it establishes
communications with its receiver(s). (Up to 20 seconds).
Note:
v
01.00 for example, indicates the software version of
the control
The display will then show Total Score.
Press
Next the display will change to show:
o
The Court number the control is programmed
to operate
o
The Set number
o
The Home score
o
The Guest score
Court: 1 Set: 1
Home: _ Guests:
ON/OFF
MPCX2 v01.00
2.4 GHz
Scanning
Total Score
Home: _ Guest:
SET 1
