WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons during device operation. To ensure compliance,
operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
Features
Specifications
MPCX2 Control:
Size:
o
Small and light weight (fits in or clips to pocket)
Approximately 3¼” x 5½” x
7
/
8
”
o
Electronic Team Name and Caption Support
Weight:
5½ oz. (including batteries)
o
Tactile confirmation of key pressed
Keypad:
o
High visibility transflective display
12 keys
o
Convenient wireless operation
Display:
o
Built in wireless signal strength meter
32 character LCD
o
Power conservation circuitry
Power requirements:
o
Built in battery meter
Two AA cells (included)
o
Long battery life
Operating distance:
o
Uses inexpensive, readily available AA batteries
1000 feet (Clear line of sight)
o
Sealed keyboard
Receiver Output:
o
No slip grip
One BNC connector (2 loads with up to 1000
ft. coax each)
o
Ergonomic single hand operation
Operating temperature:
o
Internal antenna
0°F to 150°F
o
Mate multiple controls to same scoreboard
o
Operate multiple scoreboards
Certifications:
o
Retrofits to existing wired installations
FCC part 15 Class B
CE
RoHS
Note: Remove AA batteries from the X2 controller when it is not going to be used for a
prolonged period of time.
N
OTE
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of Nevco could void the user’s authority to operate this equipment.
This class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.
Cet appareil numerique de la classe B repecte toutes les exigences du Reglement sure le materiel brouller du Canada.
