11
Setting Segment Function Options
Segment function options are:
Auto Advance – Enables the segment to automatically advance to the next segment when the time is completed.
If it is not enabled then the segment will advance to the next segment, but the time will be set to OFF.
Auto Horn – When a segment completes that has “Auto Horn” enabled the horn will sound
Adds or removes auto advance to the highlighted segment
If auto advance is off and the segment completes, time will
display as OFF until Time On is pressed
Adds auto horn to the highlighted segment
Removing a Single Segment
Hold to delete current segment. Each segment number will
go down by 1 (2 is now 1 etc) and total segments will
decrease by one each time this is done.
Inserting a Segment
To insert a segment first press “OPTIONS” the first option
to come up will be to insert a segment.
Press the “+” and a new segment will be copied from the
last segment and added to the segment list in the last
segment spot.
Horn Function
Sounds the horn
Time Function
Turns the time off
MPCX2 Power function
Turns the control and segment timer off
HORN
ON/OFF
TIME
OFF
Seg: 1 of 40 HA
0:31 Time: OFF
AUTO
ADVANCE
Seg: 2 of 40 A
0:31 Time: ON
AUTO
HORN
Seg: 2 of 40 H
0:31 Time: ON
Seg: 1 of 39 HA
0:20 Time: ON
Strikes:0
OPTIONS
+
Seg: 1 of 40 HA
0:31 Time: ON
Insert Segment
Press (+)
