9
KEYBOARD FUNCTIONS
GREETING screen
When you are done using the control turn it OFF to conserve batteries by
holding down the OFF key for 2 seconds.
Note:
In multiple controller setups. Verify that the second to last controller is
powered off before powering off the last controller so that the receiver gets the
power off command.
Note
: Always power ON the receiver(s) (scoreboard(s)) first, and wait a few seconds for the
receiver(s) to initialize (red LED illuminates) before powering ON the control. If the control is
already ON, turn it OFF, wait a few seconds, and then turn it back ON.
Note:
If, when the main screen appears, the scoreboard remains dark and does not respond to
the control, then the receiver was not found. Power the control OFF, make sure all associated
receivers are powered ON, and power on the control again. Please allow time for each control
to complete its powering ON process (main screen appears) before turning ON another
control.
Note:
If the scoreboard fails to respond to the control, power the control OFF, wait a few
seconds, and then try again. Please allow time for each control to complete its powering ON
process (main screen appears) before turning ON another control.
Scanning
ON/OFF
ON/OFF
GREETING
When the control is Powered ON, the greeting showing the
type of control
,
the software version, and the frequency it is
broadcasting.
It will then display
scanning
for the remaining
time until the control establishes communications with its
receiver(s). (May take up to 20 seconds)
Accessed
by
pressing
MPCX2 v01.00
2.4 GHz
