>@9
Multitone Audio Test System
User Manual
40 / 71
V
3.32
SYSTem: ERRors?
MEASurement:
LEVel?
SYSTem: INFormation?
MEASurement:
DISTortion:
UNIT
MEASurement:
DISTortion?
INPut: FRONt
MEASurement:
MTSinad?
INPut: LINK
MEASurement:
SELectiverss:
UNIT
INPut: RANGe
MEASurement:
SELectiverss?
INPut: SYNC
MEASurement:
NOISe:
UNIT
INPut: SWFilter
MEASurement:
NOISe?
INPut: DEEMphasis
MEASurement:
PHASe:
UNIT
INPut: TRIGger:
ARMed
MEASurement:
PHASe:
SCALe
INPut: TRIGger:
ARMed?
MEASurement:
PHASe?
INPut: TRIGger:
BREak
MEASurement:
CROSstalk:
UNIT
INPut: TRIGger:
CONFiguration
MEASurement:
CROSstalk?
INPut: TRIGger:
USRConfiguration
MEASurement:
DTMF:
STARt
INPut: TRIGger:
USRConfiguration?
MEASurement:
DTMF?
INPut:
STATus?
*STB?
OUTPut:
MTONe: PARameter
*OPC
OUTPut:
MTONe: ACTive
*OPC?
OUTPut:
LEVel
*CLS
OUTPut: BINlevel
*ESE
OUTPut: MTONe:
PRETriggerlength
*ESE?
OUTPut: MTONe:
MTONelength
*SRE
OUTPut:
FLOAT
*SRE?
OUTPut: MUTe
*ESR?
OUTPut:
MTONe: STARt
*PSC
OUTPut: MTONe:
CONTinuous
*PSC?
OUTPut:
MTONe: PARameter?
*IDN?
OUTPut:
MTONe: NAME?
*RST
OUTPut: MTONe:
BLOCklength?
*TST?
OUTPut:
MTONe: CRESt?
*WAI
OUTPut:
STATus?
Descriptive Symbols
Following terms are used in the command description.
Symbol Description
[ ]
Used to enclose one or more optional Parameter to control RT-1M. Omitting
the default Parameter causes the system to use the default action.
{
}
Used to enclose one or more Parameter that may be included several times.
?
Indicates a query by appending the question mark to the last keyword in a
command. Not all commands have a query; some are only query commands.
¦
Read this signal as an “OR“. It is used to separate alternative Parameter.
< >
Used to enclose an SCPI defined parameter
:
Used to separate elements of a RT-1M command
;
Used to separate commands in a command list
,
Used to separate arguments in an arguments list
( )
Used to indicate a range of suffixes available
:
→
String is sent from the controller to RT-1M
→
:
Returned string from RT-1M to the controller
Table 11 Symbol Description
>@9
accepts only the short or the exact and full form of the statements. Sending a
command that is neither will generate an error. In following command list, the CAPITAL
