Page 7 of 11
NPPA-TT-IDC Instruction Manual
4. Cable retention
The built in cable retention bar is at the back at the casing. Simply attach the cables with cable
ties to the bar as shown on the photo.
For large and heavy bundles there is an additional strain relief bar NPPA-S available. It is
attached to the casing with four screws.
5. Channel identification
The front panel is equipped with
channel identification strips
located in the center of the
channels and marked with the channel numbers 1-24 and 25-48 respectively.
Channel identification strips
Labeling strips
For the perfect management of the system and for individual identification according to
customer’s needs there are two large and separate labeling strips, one for the bottom and one
for the top row.
