background image

instructions for

hydraulic scissor jack 700kg 

model no: 

hsj07

Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  safeTy  

 

9

    ensure the jack is in sound condition and good working order. take action for immediate repair or replacement of damaged parts.  

  use genuine parts only. the use of improper parts may be dangerous and will invalidate the warranty.

 

9

   locate the jack in a suitable, well lit working area. Keep working area clean and tidy and free from unrelated materials.

 

9

   use jack on level/solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.

 

9

   Place wedges under wheels of vehicle, but ensure the jack wheels are free to move and that there are no obstructions.

 

9

   ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or “PArK” if automatic).

 

9

   ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to allow for vehicle tilting.

 

9

   ensure there are no passengers in the vehicle and that all non-essential persons keep a safe distance whilst the jack is in use. 

 

  Place jack under lifting points recommended by vehicle manufacturer (see vehicle hand book). ensure lifting point is stable and centred  

  on saddle.

 

   daNger:

 use the jack for lifting only, not for supporting the lifted load.

 

9

   use suitable capacity axle stands under the vehicle before proceeding with any task.

 

9

   ensure there are no persons or obstructions beneath the vehicle before lowering.

 

8

   do NoT

 operate the jack if damaged.

 

8

   do NoT

 work under the vehicle until axle stands have been correctly positioned. 

 

8

   do NoT

 exceed the rated capacity of the jack. When lifting a load of maximum capacity or close to it, it is recommended that the effort  

  be reduced by the use of assistance during this operation.

 

8

   do NoT 

adjust the safety overload valve.

 

8

   do NoT

 jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.

 

8

   do NoT 

allow the vehicle to move while supported by the jack, or use the jack to move the vehicle.

 

8

   do NoT

 top up hydraulic system with brake fluid. use hydraulic jack oil only and use a qualified person to maintain jack hydraulic    

 system.

 

8

   do NoT

 allow untrained persons to operate the jack.

 

8

   do NoT

 use jack for purposes other than which it is designed.

 

8

   do NoT

 allow persons to ride on the jack.

 

When not in use store jack, fully lowered, in a safe, dry, childproof area.    

2.  iNTroducTioN

s

cissor jack fitted with a hydraulic unit to provide the space saving properties of a conventional scissor jack with the convenience of a trolley 

jack. the hydraulic unit greatly reduces the time and effort taken to raise a vehicle compared to a standard scissor jack. suitable for the hobby 

user or as an emergency mobile jack. includes one-piece pumping handle. supplied in tough carry/storage case to keep dirty jack away from 

contents of car boot.

3.  specificaTioN

model no ..................................................................... HsJ07

capacity ....................................................................... 700kg

minimum Height ......................................................... 139mm

maximum Height ........................................................ 380mm

closed length ............................................................ 382mm

4.  operaTioN

4.1.    

Before use.

4.1.1.     Before using jack for the first time, purge the hydraulic unit in order to eliminate any air in the system. Position handle extension over  

 

release valve turn handle anti clockwise to open release valve. Attach handle extension to handle.

4.1.2.   

Pump for 30 to 40 seconds. When complete, close the release valve by turning the clockwise.

4.1.3.   

Place a few drops of hydraulic jack oil on pump piston and pump handle several times to distribute oil. thoroughly lubricate moving    

 parts.

HsJ07 | issue 1 04/11/16

Original Language Version

© Jack sealey limited

      refer to

   instructions

 Wear safety

footwear

Отзывы: