7
User Manual – DANTE
TM
Adapter NA2-IO-DPRO | BDA 573 V1 2019/08
Safety
2.3.1 Declaration of conformity
The device meets all the relevant EU directives and therefore has the CE and EAC marking. The
Declaration of Conformity may be viewed at www.neutrik.com/en/approvals-and-certificates.
2.4 Important safety instructions
Avoid property damage to the DPRO Adapter due to unsuitable operating and environmental con-
ditions:
•
Never immerse in water.
•
Protect from strong sunlight.
•
Never install the device near heat sources such as radiators, heating units, ovens or stoves.
•
To avoid overheating, never cover the device.
•
Protect the device from impact and above all, from falling from poles, stages, tables or furniture.
Repair
w
NOTE
Property damage due to improper repair!
The DPRO Adapter does not contain any parts that you can repair yourself. Opening or repairing
the devices on your own may result in severe damage to the device.
T
Do not open the housing of the DPRO Adapter under any circumstances.
T
Do not change any parts yourself.
T
Only have the DPRO Adapter repaired by a authorized specialist dealer.
Information for operation
T
Ensure that the ambient conditions specified for the DPRO Adapter are observed during
operation.
T
Do not use the DPRO Adapter if it is not functioning properly, has fallen or been damaged, has
become wet or if parts of it have been immersed in water.
T
If disruptions occur during operation:
Immediately disconnect the DPRO Adapter from audio sources and/or audio sinks.
T
Do not operate the DPRO Adapter in environments where flammable or explosive materials,
gases or vapors are present or might occur.
2.5 Intended use
The DPRO Adapter is designed for converting the signal of an analog LINE/MIC or digital AES/EBU
audio signal into a Dante
TM
signal. Dante
TM
signals can also be converted into analog LINE signals.
2.6 Foreseeable improper use
The DPRO Adapter is not suitable for use outdoors and in potentially explosive atmospheres.
