39
User Manual – DANTE
TM
Adapter NA2-IO-DPRO | BDA 573 V1 2019/08
Appendix
7 Appendix
7.1 Technical specifications
Dante
TM
specifications
Channels
2 INPUTS (Line Level / Mic / AES / EBU)
2 OUTPUTS (Line Level / Mic / AES / EBU)
Supported sampling rates
44.1 / 48 / 88.2 / 96 kHz
Bit depth
16, 24 and 32 Bit
Latency
based on user selection 0,25 ms (Dante)
Ethernet connection
1.000 BASE-T (supporting PoE)
Electrical specifications
Power consumption
< 6 watts
Power supply
1.000 BASE-T (supporting PoE) or
PoE midspan power injector (according to IEEE 802.3af/at, class 2)
Analog audio input
Equivalent input noise
-128 dBu (67 dB Gain); A-weighted
Gain hub (3 dB Steps)
0 – 67 dB
Max. input level
+24 dBu (PAD enabled)
+8 dBu (PAD disabled)
Input impedance
> 7.5 kOhm, balanced
Frequency response
20 Hz to 20 kHz (± 0.5 dB)
Dynamic range
> 112 dB, BW 22.4 kHz, A-weighted (input gain = min.)
Signal-to-noise ratio
> 112 dB, BW 22.4 kHz, A-weighted
THD + noise
< 0.005 % (20 Hz to 20 kHz, +4 dBu)
Crosstalk
-100 dB, adjacent INPUT/OUTPUT channels (input gain = min.)
Analog audio output
Output impedance
< 150 Ohm, balanced
Max. output level
+24 dBu
Residual output noise
-88 dBu, A-weighted
Frequency response
20 Hz to 20 kHz (± 0.5 dB)
Dynamic range
> 112 dB, BW 22.4kHz, A-weighted
Signal-to-noise ratio
> 112 dB, BW 22.4kHz, A-weighted
THD + noise
< 0.005% (20 Hz to 20 kHz, +4 dBu)
Crosstalk
-100dB, adjacent INPUT/OUTPUT channels (input gain = min.)
