NeuroSky MindWave Mobile 2, Руководство пользователя

Страница: 18 / 19

Troubleshooting and Support
The MindWave Mobile 2 does not turn on.
The battery might be low. Please try replacing the battery and try again.
The signal quality status is consistently poor.
Check that the forehead sensor and each clip contacts are making good contact with the
skin. Make sure to remove all obstructions including hair and jewelry.
It usually takes three or four seconds for the headset to validate the signal after holding
still. Also make certain to keep the sensor and contacts clean.
The eSense meters do not move.
Be sure to allow several moments for the eSense meters to go through some
self-calibration and initialization before troubleshooting. If the meters still do not move
after 10 seconds, make sure the sensor rests on the skin of the forehead and the contacts
are on the skin of the left ear. The sensor and contacts must always make firm and
consistent contact with your skin.
I don't seem to be able to control the eSense(tm) meters.
Like exercising an unfamiliar muscle, it may take some time to gain full proficiency with the
eSense™ meters. First, be sure you understand how the eSense meters work and what
they are measuring. Generally, we recommend engaging Attention by concentrating and
Meditation by relaxing. Most importantly, be sure you have read the detailed explanation
of eSense previously described in the
​ eSense ​ sections.
I still have a problem, or my problem is not covered by this Troubleshooting
section.
For further technical support, please contact NeuroSky Support at
http://support.neurosky.com ​ or email support@neurosky.com.
May 14, 2018 ​ | © 2018 ​ NeuroSky, Inc. ​ All Rights Reserved.
18