NeuroSky MindWave Mobile 2, Руководство пользователя

Страница: 11 / 19

2. The overhead band of the MindWave Mobile 2 is adjustable and can be extended to fit
various sizes. Put on the MindWave Mobile 2. If the sensor does not make contact with
the forehead or if the fit is not comfortable, remove the MindWave Mobile 2 to re-adjust
the overhead band and the forehead Sensor Arm. The forehead Sensor Arm is flexible
and should arch inwards.
3. Allow the rubber ear hoop to rest behind your left ear, and then clip the earclip onto
your earlobe.
4.
​ Make sure the two metal contacts on the inside of both sides of the earclip make
skin-contact with your earlobe or ear
​
. Move any hair or obstructions (such as jewelry)
out of the way. Readjust the earclip as necessary to make proper contact with the skin of
your ear. You may need to squeeze the ear clip against your ear for a few seconds.
5. Adjust the forehead Sensor Arm of the headset so that the Sensor Tip makes contact
with the skin of your forehead. This Sensor Tip must maintain steady skin contact in order
to properly measure your mental state. The Sensor Tip should be comfortable, yet stay
firmly in position, and never move around on your skin. Keep hair away from the sensor –
the sensor must be able to directly contact the skin at all times
​
. Make up, dead skin,
or debris can interfere with the connection. Scratch or wipe the obstruction away if you
have trouble obtaining a clean signal.
May 14, 2018 ​ | © 2018 ​ NeuroSky, Inc. ​ All Rights Reserved.
11